As a market leader and primary supplier of world leading instruments to specific automation applications in the industry, we also offer the following ancillary products and services to complement our existing range.

 

1) PRESSURE SOLUTIONS

If you cannot measure it, you cannot control it.

We supply quality pressure gauges and we have developed a reputation for solving problems in the measurement of fluid handling parameters, including pressure, level and flow. As well as pressure test and calibration equipment for industrial workshops that needs the latest and most accurate equipment for calibration functions of field instruments.

For harsh measuring conditions we offer special chemical seal configurations.

 

2) INDUSTRIAL HIGH VOLUME AIR FILTRATION

Bea Filters

Bea air filter removes dust particles and water

Modern manufacturing industries require the cleanest, most reliable compressed air supply available. Compromising your compressed air supply can result in a reduction in product quality, affect site safety and can even result in a production line coming to a halt. A small investment in the VIP range of compressed

The air then passes through the second filtration layer, which consists of borosilicate micro fibres. This allows the capture pf particles with sizes down to 0.01 micron and the formation of condensate droplets, which are conveyed to the outer coalescing layers of the cartridge. This outer barrier collects the droplets of water and oil, allowing them to run down to the bottom of the cartridge and into the filter bowl of the housing assembly. Although the compressed air element allows liquids to pass through, the retained solids eventually result in them becoming blocked.

The pleated construction of our ARS range of filters elements provides a very high surface area for the retention of the solids particles (± 4-5 times when compared to conventional rolled filter of most manufacturers); the result is an exceptionally long life & very low pressure drop for the element.

  • Direct interception (removal of coarse particles on the outside of the filtration surface)
  • Inertial impaction (removal pf particles thanks to the tortuous path formed by the micro fibres).
  • Diffusion (fine particles adhere to the micro fibres thanks to “Brownian motion”).

TYPE

MAX FLOW RATE

NORMAL FLOW RATE

CONNECT

PRESSURE MAX

QTY

REPLACE

 

Nm3/h

Scfm

Nm3/h

Scfm

-

BAR

-

ELEMENT

CDF-100

120

72

100

60

1/2" Gas

16

1

ARS 100

CDF-180

220

132

180

110

3/4" Gas

16

1

ARS 180

CDF-290

330

198

290 

170 

1" GAS 

16 

ARS 290 

CDF-460

500 

300 

460 

270 

1 1/4" GAS 

16 

ARS 460 

CDF-610

680 

408 

610 

360 

1 1/2" GAS 

16 

ARS 610 

CDF-930

1000 

600 

930 

550 

2" GAS 

16 

1

ARS 930

CDF-1500

1600

960

1500

900

DN80

16

1

ARS 1400

CDF-2100

2200

1320

2100

1240

DN80 PN16

16

2

ARS 2100

Artic 44 Timed Automatic Drain

Equally important to good filtration is the displacement of any unwanted moisture and water that has collected in the air supply system.

One of the most reliable and maintenance free products available on the market is certainly the Artic TEC 44 unit, which is not only robust in design but also very versatile in multiple programming functions.

 

3) ENCLOSURES FOR VARIOUS APPLICATIONS:

Enclosure Systems from ATI Systems

  • Wall Mounted Enclosures (Mild Steel Electrical Enclosures)
  • Floor Standing Enclosures (Mild Steel Electrical Enclosures)
  • Consoles and control desks
  • Wall Mounted Enclosures (Stainless Steel Electrical Enclosures)
  • Floor Standing Enclosures (Stainless Steel Electrical Enclosures)
  • Modular Enclosures

As can be derived from the above, the main purpose of enclosures is to protect all electrical, pneumatic and process instrumentation and electronic wires mounted inside of them. It should be quite obvious that enclosures seal extremely tightly, preventing water or any other type of moisture from entering; a watertight interior is thus guaranteed as a result of the good insulation applied. It would be complete chaos if such a scenario were to take place. Luckily though, you need not have to worry about this; not as long as you make use of enclosures from Brenley Engineering Sales.

  • Mild Steel Wall Mounted Electrical Enclosures
  • Stainless Steel Electrical Enclosures
  • Stainless Steel Wall Mounted Electrical Enclosures
  • Stainless Steel Floor Standing Electrical Enclosures 

 

4) PROCESS CONTROL VALVES AND POSITIONERS:

4.1) Process Control Valves

Globe Control Valves. 15mm-700mm, #150-#1500. Globe Angle Valves,
Globe 3 way Valves. Series 7400 Control Valves, 50mm-2000mm, #150 and #300. Flush and Tank Bottom Valves. V-Ball Control Valves.
Variety of materials and trims to suit most applications.

4.2) Young Tech Company

Young Tech. Co. was established in January 1996. The company is situated in Kimpo City, Korea. YTC is a world leader in control valve accessories. YTC has been a member of the Hart foundation since May 2002.
 

The product range consists of the following:

Positioners: Pneumatic-Pneumatic, YT1200. Electro-Pneumatic, YT1000, YT1050. Smart, YT2300/50, YT2400, YT1300/50, YT2301, YT2500.

Volume Boosters: YT300, YT305, YT320, YT310, YT315

Lock Up Valves: YT400, YT405

Snap Acting Relays: YT500, YT505, YT510, YT515

Solenoid Valves: YT700

Position Transmitters: PTM5VL-R, PTM6VL-R, PTM6VR+L/S

Limit Switch Boxes: YT850, YT860

Positioners, Volume Boosters, Lock Up Valves and Snap Acting Relays are available in 316 Stainless Steel.

The YT1000 Electro Pneumatic Positioner is unique in the world. No conventional I/P converter is used. The positioner uses a combination Torque Motor and Flapper and Nozzle to achieve the conversion. As there are no electronic components the positioner is less likely to be damaged by water in the air supply.

4.3) SOLDO Controls

Limit Switch Boxes, Proximity Sensors, Namur Accessories, Dead Man Handles and De-Clutchable
Manual Overrides. IP67, ATEX suitable for zone 22, Intrinsically Safe and Explosion Proof. These Limit Switch Boxes are available in various materials of construction and with a wide variety of sensors.

Mechanical micro switches, Magnetic Proximity, Gold Plated Contacts and Inductive Proximity. Omega Series Limit Switch Box with Integral Solenoid Valve

4.4) Valve Actuators

PMP 201 & 202 Series. Anodised Aluminium and 316 stainless steel, Rack and Pinion, Double acting and Spring return. Torques from 8nm to 3200nm Conforms to ISO5211, Namur and VDE mounting standards.

Automa Series Pneumatic Actuators. Hard anodised Aluminium, Scotch Yoke, Double acting and Spring return. Torques from 8nm to 15,000 nm. Conforms to ISO5211, Namur and VDE mounting standards.

Noah 1/4 Turn Electric Actuators. IP67, ATEX approved. Torques from 50 to 2500nm.

Single Phase 110 and 220VAC, 3 Phase 380VAC and 24VDC to 280nm. PCU Proportional Control, CPT Position
Transmitter, IMS Integral Starter, LCU Local Control Unit and Integral Battery Backup (to NA28) available as options.

Noah NA and SA series of electric actuators are particularly suited for quarter turn applications in piping, ducting and various plants such as water treatment, pulp and paper, mining and general industry. They can operate butterfly, ball, and plug valves as well as dampers.

The actuators compact and simple design assures reliability and quality for customers even in hazardous locations.

Torques:from 50nm to 2500nm.
Voltages: 24VDC, 110 and 220VAC single phase and 380VAC 3 phase.
Accessories include: Positioners, Position Transmitters, Integral starters and Local control panels.

5) CONTROL PANELS AND SYSTEM BUILDING SERVICE:

We also design and build complete pneumatic control cabinets to your specific needs.

We have been involved in building and supplying control solutions to our largest clients for more than a decade.

Complete turnkey designs, including the integration of electronic and pneumatic components, to give the best solution for your control application.

• Plastic or metal panels in a wide range of colours
• Compact designs
• Custom sizes
• Pre-cabled systems
• Conformity with industry standards and norms
• High performance components

6) TEMPERATURE MEASUREMENT:

We are also able to supply temperature measurement equipment covering the following spectrum

Mineral Insulated Thermocouples material manufacturers, offering:

* RTD Sensors from 2 to 8mm OD

* Aero Pack Thermocouples from -150 to +1200 deg C

* Ultra High Temperature Thermocouples u to 2200 deg C

* Flameproof RTD's and Thermocouples

 

Please feel free to contact us in the event of any requirements that you may have regarding our additional products and services and we will gladly assist you in identifying the correct product for your industry specific application.

Back